MSc Geotechnical Engineering
Course Overview 项目概述
The primary objective of the Master of Science (Geotechnical Engineering) is to produce engineers who can plan, design and supervise construction of temporary earth retaining structures and other geotechnical problems that are more complex than standard foundations in a competent and professional manner. The secondary objective is to provide continuing education to engineers who wish to be trained solely in the highly specialised area of geotechnical engineering.
理学硕士（岩土工程）的主要目标是培养能够以合格和专业的方式来规划，设计和监督临时土方支护结构的施工以及比标准基础更复杂的其他岩土工程问题的工程师。次要目标是为希望在高度专业化的岩土工程领域接受培训的工程师提供继续教育。
Course Structure and Tuition 课程结构与费用
Tuition: S$18,475 (per semester)
学费：新币18,475 (每学期)
Coursework programmes leading to the Master of Science (MSc) are normally conducted in the evenings and are awarded once the candidates pass the relevant examinations in a prescribed number of subjects. Students may enrol in any of these programmes on a part-time or full-time basis. However, International candidates who are not long-term residents of Singapore at the time of application are only eligible to apply for the full-time MSc programmes, and if offered admission, they are to be registered as full-time students.
授课型的理学硕士课程通常在晚上进行，并且一旦考生通过规定数量的科目的相关考试便可授予学位。学生可以非全日制或全日制学习参加这些课程。但是，申请时不是新加坡长期居民的国际申请人只有资格申请全日制硕士课程。
Typically the study workload for students are as follow:
Part-time
Classes: Normally take 2 modules each semester (i.e. generally attend lectures 2 evenings per week).#
Maximum workload per semester:12 MCs*
Period of candidature
Minimum residency: 50% of required MCs
Normal Course Duration: 5 semesters / 2.5 years
Maximum candidature: 8 semesters / 4 years
通常，学生的学习工作量如下：
非全日制
课程：通常每学期学习2个模块（即通常每周2个晚上参加讲座）。
每学期最大工作量：12 学分 *
课程时长
最短时长：完成所需学分的50%
正常课程时长：5个学期/ 2.5年
最长时长：8个学期/ 4年
Full-time
Classes: Normally take 3-5 modules each semester (i.e. generally attend lectures between 3-5 evenings per week).#
Maximum workload per semester: 16 – 20 MCs*
Period of candidature
Minimum residency: 50% of required MCs
Normal Course Duration: 3 semesters / 1.5 years
Maximum candidature: 4 semesters / 2 years
*A graduate module is normally equivalent to 4 MCs.
全日制
课程：通常每学期需要3-5个模块（即一般每周3-5个晚上参加讲座）。
每学期最大工作量：16 – 20 学分 *
课程时长
最短时长：所需学分的50％
正常课程时长：3个学期/ 1.5年
最长时长：4个学期/ 2年
*一个模块通常相当于4个学分。
The Master of Science in Geotechnical Engineering course, or M.Sc. (Geotec), is hosted by the Department of Civil Engineering. The programme accepts both full time and part time students. To qualify for the M.Sc. (Geotec) degree, a candidate must successfully complete a programme of study consisting of at least 40 Modular Credits (MCs):
28 MCs from the list of core modules
The remaining MCs from the list of elective modules
岩土工程理学硕士课程，由土木工程系主办。该项目接受全日制和非全日制学生。学生必须成功完成由至少40个学分的学习计划，方可获得学位：
来自核心课程列表的28个学分课程
选修课程列表中的其他课程
Application time 申请周期
August intake: Application will open approximately in January
January intake: Application will open approximately in July
8月入学：1月将开放申请
1月入学：7月将开放申请
Entry Requirements 录取要求
Prospective student should have a Bachelor’s degree with honours or its equivalent from a good University, in an area related to the intended programme of study;
学生应该在与预定学习课程相关的领域中获得荣誉学士学位或同等学历的学士学位;
To meet the English requirement for our MSc programmes in Engineering, the minimum score expected is :
85 (for TOEFL internet-based test) or
6.0 (for IELTS (Academic)).
为了满足我们的工程硕士课程的英语要求，最低分数要求是：
85 (托福) 或
6.0 (学术雅思).
Modules & Graduation Requirement
课程设置&毕业要求
Student must obtain a minimum CAP of 3.00 (equivalent to an average grade of B-) for the best modules equivalent to 40MCs, inclusive of the core modules. Furthermore, the grade point obtained for each of the 7 core modules must be at least 2.5 (C+). A student is allowed one re-take for at most two core modules if the grade point obtained is less than 2.5 (C+).
学生必须完成40个学分课程，并获得最小平均成绩绩点 3.00（相当于平均等级B-），其中包括核心课程。此外，7个核心课程中每个学分课程获得的成绩绩点必须至少为2.5（C +）。如果获得的成绩点小于2.5（C +），则允许学生最多重读两个核心课程。
The structure of the curriculum is derived from the need to meet the primary objective of the M.Sc. (Geotec) programme, which is to produce engineers who can plan, design and supervise construction of temporary earth retaining structures in a competent and professional manner. This necessitates the relatively large number of core modules.
课程结构源于满足硕士学位主要目标的需要。理学硕士项目旨在培养能够以合格和专业的方式规划，设计和监督临时挡土结构施工的工程师。这需要相对大量的核心课程。
Core Module
The list below shows the core modules, which are 4 MCs each.
CE4257 – Linear Finite Element Analysis
CE5108 – Earth Retaining Structures
CE6101 – Geotechnical Constitutive Modelling
CE5111 – Underground Construction Project
CE5112 – Excavation Support Systems (compulsory pre-requisite: CE5108 Earth Retaining Structures)
CE5113 – Geotechnical Investigation & Monitoring
CE6102 – Geotechnical Analysis
核心课程
以下核心课程均是4个学分。
CE4257 – 线性有限元分析
CE5108 – 土壤挡土结构
CE6101 – 岩土本构模型
CE5111 – 地下建筑项目
CE5112 – 挖掘支持系统（必修先修课程：CE5108地球挡土结构）
CE5113 – 岩土勘察
CE6102 – 岩土工程分析
Note: CE6102 needs two pre-requisites/co-requisites, namely CE4257 and CE6101. In other words, you need to have taken CE4257 and CE6101 in a previous semester or are taking them the same semester as CE6102. Otherwise, the system will not register you for CE6102. In terms of contents, CE6102 will draw heavily from CE4257 and CE6101. For this reason, you are advised to take CE4257 and CE6101 as early as possible in your study.
注意：CE6102课程需要两个先修课程/并修课程，即CE4257和CE6101课程。换句话说，您需要在先前的学期学习CE4257和CE6101课程，或者与CE6102在同一学期学习。否则，无法进行CE6102课程注册。在内容方面，CE6102会大量涉及CE4257和CE6101课程内容。
Elective Modules
The list below shows the elective modules, which are 4 MCs each.
CE5101 – Seepage and consolidation of soils
CE5104 – Underground space
CE5105 – Analytical and Numerical Methods in Foundation Engineering
CE5106 – Ground improvement
CE5107 – Pile foundation
CE5881 – Topics in Geotechnical Engineering: Soil Dynamics
CE6002 – Analysis of Civil Engineering Experiments
CE6077 – Advanced Numerical Methods in Mechanics & Environmental Flows
选修课程
以下选修课程均是4个学分。
CE5101 – 土壤的渗透和固结
CE5104 – 地下空间
CE5105 – 基础工程中的分析和数值方法
CE5106 – 地面改善
CE5107 – 桩基础
CE5881 – 岩土工程专题：土壤动力学
CE6002 – 土木工程实验分析
CE6077 – 力学与环境流动的先进数值方法
